kasceblack.blogg.se

1. Macbook pro cable failure ssd upgrade update#
2. Macbook pro cable failure ssd upgrade full#

Macbook pro cable failure ssd upgrade update#

Let’s call this SSD A.Īfter the update the MacBook doesn’t boot up properly anymore: Apple logo and progress bar appear, everything looks normal at first, but at 50% the progress bars stalls. It has a 512 GB SSUBX Apple Samsung OEM SSD (Model MZ-JPV5120/0A4). I have the 13" MBPR (Early 2015, 2.9 GHz i5) of my 78 year old father here, which is kind of dead after he – if he recalls correctly – performed an update from Big Sur 11.x to Big Sur 11.y (he grabs every update he gets offered, so unfortunately he doesn't pay much attention to the details). You're done with it.I've heard quite a few stories of Big Sur bricking older MacBooks, but I'm not quite sure in which way precisely they get bricked (motherboard or just SSD), so question is whether the following story fits into those reports: At this point, you can store your hard drive away or convert it to an external hard drive. Remove the four torx screws attached to the hard drive and set aside. Carefully wiggle the connector - not the ribbon itself - to disconnect it. You'll see that a SATA ribbon is attached to one end. To remove the hard drive, use the regular screwdriver to unscrew the two black screws belonging to the bracket securing the hard drive. Use a soft brush or gentle bursts of compressed air to release the dust and grime.

Macbook pro cable failure ssd upgrade full#

I found that after years without cleaning, mine was full of dust. At this point, you might want to clean the inside of your Mac. When the cover comes off, touch a metal part to release the static electricity. Put them in a small container as you remove them they are easy to misplace. Remove your MacBook's back cover by unscrewing the tiny screws.

In case you missed it in the previous step, shut down your computer.

When the process is complete, eject the SSD and shut down your computer. This could take anywhere from 30 minutes to a few hours, depending on how much you have stored on your hard drive. Then choose Backup All Files, and click Copy Now. If you gave it a new name in Disk Utility, it'll show up as such. Next, launch SuperDuper, and set it to clone your Mac's hard drive to the SSD. This will format the drive and prep it for the next step. No need to change any settings, unless you'd like to give it a new name. Then, click the Erase button at the top of the window and then click Erase. Once it's connected, launch Disk Utility (searchable through Spotlight), and select the SSD from the left sidebar.

Start by connecting the SSD to your computer with a dock or cable. Torx head screwdriver for disassembling the hard drive.A 2.5-inch SATA SSD (I used the Samsung 850 Evo).(I found them at my local Ace Hardware.)Īs you'll see in the video below, my colleague Sharon Profis resurrected her 2009 MacBook Pro with an SSD and agrees with me that the process is simple and straightforward. Really, the hardest part of the whole thing was tracking down a size 6T torx-head screwdriver for the four torx screws that help hold the hard drive in place.

The whole procedure took less than an hour (not counting the half a day it took to clone my MacBook's hard drive to the SSD). I replaced my 2011-era MacBook Pro's 500GB hard drive with the 500GB Samsung 850 Evo. And they aren't nearly as costly per gigabyte as they once were. They are more energy efficient, more reliable and quieter than hard drives with magnetic, spinning disks. There's a reason that all modern MacBooks and the vast majority of all laptops sold today use SSDs. If you have an old MacBook Pro with one foot in the grave, the single best thing you can do to breathe new life into it is replace its traditional spinning hard drive with a solid-state drive.